AcuraLegend.Org - The Acura Legend Forum for All Generations of the Honda / Acura Legend; 1986 to Present

AcuraLegend.Org - The Acura Legend Forum for All Generations of the Honda / Acura Legend; 1986 to Present (http://forums.acuralegend.org/index.php)
-   2nd Gen. Legend Performance Enhancements (http://forums.acuralegend.org/forumdisplay.php?f=8)
-   -   Legend93g2's 2011 Mod List (http://forums.acuralegend.org/showthread.php?t=18308)

legend93g2 03-17-2011 05:39 PM

Legend93g2's 2011 Mod List
 
Im planning on doing a few things to my legend this year and for sake of making a bunch of threads il make one BIG one:)

So far i have a small list of things i will be getting this year an some i have already ordered but havent got them in yet.

Pics to come....

MOD List

* LEDs for Dome lights and Cluster. Thanks LegendLand!
Ordered, Recieved, Installed.

* Telion Powder-Coated Suspension Tie Bars. Thanks to Telion
Ordered, Recieved

* Telion strut bar
Ordered, Recieved, Installed

* Porting T2 TB and Neck. Il be doing the porting work. Thanks to Actionjackson, an Maxxbore.com
Ordered, Received, Intsalled

* TB spacer. Thanks to legend-coupe
Ordered, Received, Intsalled

* Koni Reds Shox.com
Ordered!, Recieved, Installed

* Ground Control Coilevers Shox.com
Ordered!!, Received, Installed

* SPC Camber kit Shox.com +1.5/+3 degrees
,Ordered, Recieved, Installed

* 35% Windshield Tint
Installed

* Rear Emblems Thanks to Earl!
Ordered,

* Acura TL shift boot
Ordered, recieved, Installed

legend93g2 03-17-2011 06:44 PM

Thanks Alan:bigok:
Im going to start porting tomorrow

http://i637.photobucket.com/albums/u...2/18092591.jpg

legend93g2 03-18-2011 04:51 PM

Thanks Legend-Coupe:bigok:

http://i637.photobucket.com/albums/u...2/c8df210c.jpg

legend93g2 03-18-2011 04:54 PM

Now for some work and put these 2 together:)

*beforehttp://i637.photobucket.com/albums/u...2/8ffbe17b.jpg

Just to show it fits, and its not flush.... Not a problemhttp://i637.photobucket.com/albums/u...2/778f28f7.jpg

http://i637.photobucket.com/albums/u...2/259e21d0.jpg


Still needs more work but with the time i had today i made them Almost flush and will start porting further inside, and making the edges smoother.http://i637.photobucket.com/albums/u...2/d7e0ca0b.jpg

legend93g2 03-20-2011 08:34 PM

Almost
 
Before
http://i637.photobucket.com/albums/u...2/b435d593.jpg

After
http://i637.photobucket.com/albums/u...2/97199839.jpg

http://i637.photobucket.com/albums/u...2/2e3fbcdb.jpg

Lightly touched up the Throttle body, I believe about 2mm.
http://i637.photobucket.com/albums/u...2/2d5b63d6.jpg

GreekPower 03-20-2011 08:48 PM

How are u porting everything. Please list the tools

legend93g2 03-21-2011 07:54 AM

Quote:

Originally Posted by GreekPower (Post 339347)
How are u porting everything. Please list the tools

It's not the best way and i don't advise ppl to do it but it worked and did the job.

*Pencil sized die-grinder (air , not electric)
* bought a 250peice kit and used a small metal nibbler and did alot of sanding.


Il post a pic of them later just so you can see what bits and die grinder I used.

Legend-Coupe 03-21-2011 09:05 AM

Spacer is designed to allow for porting and larger TB that's why the bore is to large.
Interesting side note, iirc my TB neck was bigger at 65mm stock i'll need to check that though.

legend93g2 03-21-2011 03:17 PM

^ I never said anything bad about it. I like the mod it does help. Just was making this flush.

legend93g2 03-21-2011 03:19 PM

http://i637.photobucket.com/albums/u...2/8301bd92.jpg

http://i637.photobucket.com/albums/u...2/b77f8b24.jpg


All times are GMT -7. The time now is 06:55 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.