Recently got myself a 93 legend - AcuraLegend.Org - The Acura Legend Forum for All Generations of the Honda / Acura Legend; 1986 to Present

CakeFax · 07-05-2022, 11:00 AM

Hi recently bought a 93 legend and after having done some digging on this forum I think I'm in the need of at least having a look at my EGR system since from what I can see in my service books it's not been cleaned. But it may have been idk.
The car has done 155k~ miles.
Is there anything I need like new gaskets when I do this? Or can I just reuse the existing ones?
*it is also a Honda legend from germany and not an accura legend if that makes any difference.

Eliot · 07-05-2022, 11:16 AM

You can probably get away with using the existing one, but if possible I would replace it with a new one since it is a integral part of the emissions system. If your country or local government allows, you could delete the EGR system overall. I have not attempted this so you would have to search the forums for this.

CakeFax · 07-05-2022, 12:26 PM

Alright, does anyone have links for like all the gaskets somewhere or will I just have to find them? "Modern" parts sites are kinda hit and miss with older cars I've found so would be nice.
Also looking at the intake manifold gaskets while I was at it and I'm wondering what the fourth hole is for? Does it route coolant through the intake?

Eliot · 07-05-2022, 03:34 PM

I'm unable to help when it comes to getting parts in Germany.
I can tell you https://www.rockauto.com is a popular source for Legend parts in this forum. Hopefully another member from Germany or near your country can provide a more local source.

CakeFax · 07-06-2022, 04:44 AM

The car is imported from Germany but it's in Sweden now. Also it's engine code is C32A2 if that helps.

07-05-2022, 11:00 AM	#1
CakeFax Junior Member Join Date: Jul 2022 Posts: 3	Recently got myself a 93 legend Hi recently bought a 93 legend and after having done some digging on this forum I think I'm in the need of at least having a look at my EGR system since from what I can see in my service books it's not been cleaned. But it may have been idk. The car has done 155k~ miles. Is there anything I need like new gaskets when I do this? Or can I just reuse the existing ones? *it is also a Honda legend from germany and not an accura legend if that makes any difference.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
If you purchased OBX headers recently...	sr5guy	2nd Gen. Legend General Discussion	34	05-05-2022 02:31 PM
Some stuff I did recently	Grumpy	Other Cars	9	07-27-2010 10:41 PM
recently acquired a 1st gen RL	slowdownghandi	New Member Introductions	6	06-11-2010 12:47 PM
Anyone get a flu shot recently?	GreekPower	The Water Cooler	40	02-07-2010 12:14 AM

07-05-2022, 11:16 AM	#2
Eliot Member Join Date: Jun 2009 Posts: 407 '94 ACURA Legend Coupe LS	You can probably get away with using the existing one, but if possible I would replace it with a new one since it is a integral part of the emissions system. If your country or local government allows, you could delete the EGR system overall. I have not attempted this so you would have to search the forums for this.

07-05-2022, 12:26 PM	#3
CakeFax Junior Member Join Date: Jul 2022 Posts: 3	Alright, does anyone have links for like all the gaskets somewhere or will I just have to find them? "Modern" parts sites are kinda hit and miss with older cars I've found so would be nice. Also looking at the intake manifold gaskets while I was at it and I'm wondering what the fourth hole is for? Does it route coolant through the intake?

07-05-2022, 03:34 PM	#4
Eliot Member Join Date: Jun 2009 Posts: 407 '94 ACURA Legend Coupe LS	I'm unable to help when it comes to getting parts in Germany. I can tell you https://www.rockauto.com is a popular source for Legend parts in this forum. Hopefully another member from Germany or near your country can provide a more local source.

07-06-2022, 04:44 AM	#5
CakeFax Junior Member Join Date: Jul 2022 Posts: 3	The car is imported from Germany but it's in Sweden now. Also it's engine code is C32A2 if that helps.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)