First NSX/Legend engine swap (LegeNd-SX)

[Car2n]

Telion thx I also got mine from the same site but for the 91 and i have the OEM wiring diagrams from a manual i purchased from Ebay but later found out that it is free on line all these diagrams and instructions are very helpful to understand a lot of the stuff that i am not really deep into but things are getting together.

One problem that i being having is that I don't find things that i puted away in storege when i stripped the car, i have soo many things in my little shop that after 7 months of work i do not know where they went to...

[Car2n]

Reboticon that is a really nice electrical harness work you made very good you have very good info with the OBD0 to OBD1 diagram thanks.
Well actually I am not making a new harness, I'm using the NSX ECU and harness like i said just extending wires to reach to the proper spots.

[Car2n]

Quote:
Originally Posted by Russian
Any updates?

Well not very much... All of the custom radiator hoses and fittings are completed, some other engine related accessories are installed, engine harness installed back in the engine, also making custom harness for fuel pump electrical, still working on diagrams to make sure where to splice and what to delete, etc. there a lot of work planning and design time still for relays, fuses and ECU custom electrical connectios.

Right now I am trying to get made custom headers flanges to start headers design also have all of the body work and paint pending

Tomorrow I will post a couple of pics of the progress mentioned above...

Thanks for looking into this thread.

[Car2n]

Here are the latest pics of the little progress. Is really messy had to removed some hoses and items to run the harness.

[Car2n]

Quote:
Originally Posted by 1stgen5spd
keep it up man, this is an amazing project, im behind you 100%... i wish i could help more than with my words, but im afraid its all ive got to offer..

Thankx for your support and all you guys that are always looking for the next update that is all i need from you that helps a lot thankx

Quote:
Originally Posted by samblaze
I've been following the thread from day 1 man! You've made some amazing progress and I look forward to more pics!

Hey that is woderful to know guys you and others always supporting and reading all the posted advances since the begaining, i wish i can finsh it sooner but still a lot to do.
Once again THANKS!

[Car2n]

Quote:
Originally Posted by reboticon
keep it up! Are those big flexy hoses the radiator hoses? Where did you get them?

Those I got them from JEGS but later found out that Pep boys sells them localy Wasted shipping fees...
That was my best solution for the custom hose connections.

[Car2n]

Quote:
Originally Posted by Telion
That is coming along great! I nan't wait to hear a vid of it fired up.

Hope to get a good camera for it.


Quote:
Originally Posted by MichaelKA8
That's a very great job, you are doing there.
I'm looking forward your updates too.
This kind of Legend would be great on our unlimited motorways!
Regards from Germany

Regards back from Texas and what is unlimited motorways?


Quote:
Originally Posted by Shai_Hulud
allways great to see updates in this thread. i remember a couple of years back we were looking into this swap, and if it was really possible. It is incredible to see that it indeed is
Yes i know i had read a lot in then and help a lot to understand the possibility of the swap.

this is one of my favorite threads of all time for sure

keep up the good work!

Thanks i always tryed to keep this thread updated hope to get a vid soon...


Quote:
Originally Posted by Dreams94coup
damn i cant wait to see your do you a burn out and quarter mile with that bad boy. Is there any thoughts or ideas on what kinda numbers you may be producing

Honesly don't know but hope to be around the 12's cuz of the weight reduction on this project maybe lower 12's

[Car2n]

Now I get it, are those highways in Germany which have no speed limit or something like that OK.

[Car2n]

Thankx for your support and all you guys that are always looking for the next update that is all i need from you that helps a lot thankx


Hey that is woderful to know guys you and others always supporting and reading all the posted advances since the begaining, i wish i can finsh it sooner but still a lot to do.
Once again THANKS!

[Car2n]

I was really lucky, i don't have to extend the engine/ECU hrness wires I ran them thru the fire wall they just reached enogh but just what is need it

Hers is a pic of the inside where the control panel is going to be.


Just finshed the preliminary control panel asembly will be install under the dash passenger side.